Melvin Prince asked 1 year ago
If your 500 keyfob stops working, try a different one to test if it will be detected by your car. If it does, the issue is likely with the original fob’s battery or water damage.
First, replace the battery. The “+” side should be facing downwards.
Dead Battery
The majority of the time, when a fob won’t work, it’s just because the battery is dead. It’s not difficult to fix, and most fobs warn you when the battery is not fully charged. You can find the correct procedure for most car key fobs on YouTube or in the owner’s guide. You can also bring it to an area locksmith or the dealer that supplied it to you to repair it.
Sometimes a fob stops working due to a problem on the circuit board inside. It’s not a common occurrence but it can occur. If you dropped the fob onto something hard, it may damage the internal chip. This is also the case if you use an aftermarket key and the fob doesn’t work. In this instance it is essential to visit a dealer locksmith to get the key reprogrammed to make it compatible with your 500.
One 2012 FIAT FIAT 500 flip key remote – Looks like Ilco with locks, unlocks, and trunk buttons – new replacement keyless entry (will need to cut & program by a locksmith).
Chips damaged
A key fob from Fiat 500 is an wireless device that sends an indication for the car to start when you push the button. It is equipped with a microchip that contains information about the code which is required to communicate with the car. If the chip is damaged, it can’t send the correct code, and the car will not start. Locksmiths can fix this kind of damage. United Locksmith is capable of providing this service for old models as well as the latest ones, so don’t hesitate to call them. scared to contact them.
Locksmiths can program a new key fob. This is a lot less expensive than going to the dealer and it works just as well. Locksmiths will require specific details from you, such as the year that your car was manufactured as well as the name of its model.
Rub the chip with an old dollar bill if you’re not certain what to do. The copper on the bill is abrasive enough remove oxidation and dirt, but won’t cause any harm to the microchip. If the chip is physically damaged however, it may not be able to be repaired. This could happen if you drop it or hit it by your vehicle.
Water Damage
If you’ve accidentally dropped your keys in the pool, left them in your purse while swimming at the beach, or splashed them with water on a rainy afternoon It’s likely that your fob may have water damage. Even if there’s only tiny amounts of water on the key, it can cause serious problems to its electronics.
The good news is that it is possible to solve this issue by taking off the fob’s key and then using the paper towel to cleanse it of any remaining water or dirt. Once the fob has dried and is dry, you can replace its battery. It will then begin working normally.
You can also take your key fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These professionals can use special equipment to make sure that the key fob works with your car’s computer system.
If your Fiat 500’s keys fob isn’t working, it can be stressful and disorienting. You may be tempted to go to the dealer to replace your key fob however, this can be costly and inconvenient. Locksmiths can handle all aspect of the replacement of your car’s key fob without the requirement of a dealership trip. Locksmiths are better over a dealer as they can take care of all aspects of your car’s key fob replacement without the need for a dealership visit.
Pairing Issues
If you drop your key fob or it stops working, and Fiat 500 Key Fob Replacement there’s nothing going on there could be a chip that has gone off the rails. It could be due to water damage or the battery is dead.
This can be accomplished by simply following the directions in your owner’s manual. However it’s best to hire an automotive locksmith perform this procedure if you’re having trouble or the instructions in your manual aren’t working for you. This will ensure that your chip isn’t damaged and is likely to be the most cost-effective solution.
A number of owners have reported that their key fobs will not lock their cars. This can be a huge issue if you’re at an gas station to fill up. Some owners have reported their 500’s locking mechanism breaking and requiring replacement of the entire steering intermediate shaft. Fiat has actually mentioned this problem in an technical bulletin (TSB).
If you’re having trouble with your Fiat car, the services of a reliable locksmith can help. They’ll duplicate your existing key or make you an entirely new one that can lock and start the car. They can accomplish this without having to see your previous key and are usually more affordable than purchasing it from a dealership.