ghost immobiliser fitting Immobiliser Problems and Solutions
We save for years to buy cars. It can be very traumatic when your joy and pride is taken away.
If you have the ghost immobiliser installed by a reputable repairman, such as Car Theft Solutions it can stop thieves from escaping in your car within a matter of minutes.
1. No Stop/Start
The autowatch ghost immobiliser fitting Ghost CAN Immobiliser was created and developed to be one of the most efficient security systems available. The system works by using the buttons on the steering wheel, center console, and pedals to enter an encrypted pin code within the vehicle’s system. This will shut down the engine. This prevents thieves from stealing your vehicle even if they have the fob or keys.
The Ghost also has high-security options to stop the device being hacked or bypassed by thieves. This includes CAN bus blocking and cutting the immobiliser. When combined with an insurance-approved marking system, the chances of your car being stolen are virtually nonexistent.
This system also works with your vehicle’s factory-installed immobiliser to provide an additional layer of security preventing the thief from starting your vehicle even when they have your key or fob. This helps to protect your resale value as well as keeping your family members secure.
If your Ghost has stopped functioning, it could be an an indication of other problems that are not ghost immobiliser fitting near me-related. To test this, switch to valet or service mode on your Ghost. This will disconnect your Ghost from the car and you should be able to start the car. If you are unable to do this, it could be an issue with your Ghost installation or it could be another issue causing this.
It is not advisable to attempt to remove ghosts on your own unless you have the necessary expertise. This is because you work with a complicated and delicate system that directly controls your engine. It’s risky and could cause serious damage if you handle it incorrectly. Therefore, it is recommended to seek assistance from your installer.
2. No ignition
Immobilisers are used in modern cars to stop the vehicle from starting if your key does not match the one that is programmed in. This is accomplished by transmitting a transponder code from the key to the immobiliser which then compares it with the ones stored inside it. If the codes match, the engine will start. The system could fail due to a variety of reasons, car ghost immobiliser such as a stolen or missing key, a damaged transponder or one that’s not coded, car ghost immobiliser or electrical problems such as a damaged immobiliser antenna wire that is located around the ignition cylinder. Multiple keys can also confuse the codes, such as a spare or a vehicle with two transponders in the same key.
In the event that the immobiliser doesn’t function correctly, it may be difficult to start the vehicle, which would give thieves the impression that it’s a faulty system and they’ll be able to leave with your joy and pride. This makes it an important investment for anyone who owns a car particularly those with prestige vehicles that can be difficult to sell after being damaged or stolen.
The ghost immobiliser can be hidden in almost any part of your vehicle which makes it virtually unnoticeable by car thieves. It uses the buttons on your steering wheel, door or centre console to create a unique PIN code sequence that you are familiar with which ensures you are the sole person who is able to drive the vehicle. It doesn’t have LED indicators and is completely silent, so a thief won’t even know it’s there. The Ghost is TASSA accredited and Insurance Approved. This means it can be fitted by an approved installer. It also helps to safeguard your investment from hacking and key cloning.
3. No engine start
It’s not surprising that many are looking to add an extra layer of protection. With car thefts increasing and keyless entry vehicles a particular target for thieves, it’s not a surprise that people would like to add an extra layer of security. Installing a ghost immobiliser is among the most effective ways to accomplish this. This innovative device safeguards your pride and joy from theft and damages with the help of some of the most advanced technologies on the market today.
The Ghost is a brand new security system that is different from traditional security systems that rely on key fobs and LED indicators. It is based on an exclusive pin code sequence that only you be aware of to start your vehicle. The device is connected to the vehicle’s CAN data network, and then programmed to secure it by via buttons on the dash and steering wheel. The device will not permit the engine to start unless your pin code is entered first. This happens completely in silence it doesn’t require any clicks, unlike other systems – meaning that it’s virtually impossible for a thief to spot.
It can also turn off the stop/start eco mode if needed. It can vary from vehicle to vehicle, but the procedure is generally as simple as locking the gearbox into P or slowing down the system.
Ghost immobilisers are extremely efficient at protecting your vehicle, and can be used with any key, or even a spare. It can stop all kinds of car theft, including key duplicates and ECU swapping. It also helps prevent vehicle damage by detecting vibrations or tampering. It also helps safeguard your vehicle’s resale value by making it less appealing to thieves.
4. No keyless entry
The last thing a car owner wants to experience is being the victim of their pride and joy stolen. If you’ve put a lot of effort into saving for your car or just the owner of an expensive car that you’re proud to show off and dealing with a vehicle that’s stolen is a very disheartening experience. With the right security system you can ward off even the most clever of thieves.
Ghost 2 immobilisers, unlike wheel locks or Faraday bag can be fitted discreetly in your vehicle without damaging your vehicle. They will only allow you to start your car if the unique code is entered correctly. You can change the pin code as many times as necessary. The device also functions differently for each vehicle, meaning thieves won’t even know it’s even there.
Ghost II links up to the CAN system of your vehicle and communicates with it on the CAN data circuit which means it is not able to be detected by the common thieves’ RF scanning or code grabbing technology. It isn’t able to be re-enabled by adding a new key or replacing the ECU since only the correct pin code will allow your Lexus to start.
Our TASSA certified Ghost 2 immobiliser is insurance approved and will provide you with the assurance that your vehicle is secure from theft that is not a contactless process. This will not only help you recuperate any losses that could result from theft, but it will also make it more difficult for thieves who might try to attempt to sell your vehicle since they will be aware of the anti-theft security system. This could save you thousands of dollars in resale value.
5. No alarm
Ghost immobilisers are one that is technologically advanced and installed in your vehicle to stop it from being taken. It protects your vehicle from being taken by stopping the engine from starting until you enter a pin-code code that you are familiar with.
This is a fantastic anti-theft device because unlike the car alarm or wheel lock ghost immobilisers cannot be removed or spoofed. It can also be used to jump start. If a thief attempts to steal your vehicle using this method, he’ll find that the car will not start and it will be forced to drive off without it.
car ghost immobiliser (click this link now) theft has become more sophisticated, so technology has to improve to stop thieves from taking your joy and pride. This is the reason it’s so important to secure your vehicle with a ghost immobiliser. They’re not just affordable, but also highly effective at protecting your vehicle.
They are nebulous and are barely noticeable, meaning thieves will not be able see them. The device can also be used with a car tracking system, to ensure that you know where your car is and if it is safe.
The Ghost CAN immobiliser was the first aftermarket CAN bus lock. It was created to protect against key hacking or cloning, as well as key theft. It’s also TASSA verified, which proves that it’s reliable. The device is installed in a secure location it operates silently and has no radio signals. It’s also undetectable by the naked eye. It is cheaper than a traditional car alarm and will do more to stop thieves from stealing the car in the first place. This will provide you with peace of mind and make your car more secure than ever before.